UltraWiz® Cold Knife Blades

In the next series of articles we will learn more about different auto parts and tools from a variety of manufacturers. We will learn about the specifications of these tools and materials. We will also learn about the benefits of these tools, which will include air blow guns, compressors, drills, hammers, pump, piping, and sandblasters, filters, oils, auto glass caulking guns, and much more.The tools will include anything that you can think about, including auto glass and replacement tools.  

We will indeed cover parts and tools ranging from the engine of a vehicle to the chassis to the wheels and tires.

Let's get started.

Durans Auto Glass provides auto glass repair and replacement services, no matter what vehicle you have, whether is a Nissan, Honda, or any other. 

UltraWiz® Cold Knife Blades

These blades come in a standard thickness

and a thinner version called UltraThin

which average 40% thinner. Both styles

are made with UltraWiz®’s dual-angle

sharpening method.

PN1000 is intended for use as a starter

blade. The cutting area is 3/8" long and

is useful when starting your first cut on

urethane that is wider than a regular

blade.

Original Thickness

Package of 10

PN1001 has a cutting area that is 3/4"

long. It is commonly used to cut

standard-width urethane. Many

technicians use this blade to make the

first cut on wide urethane.

Original Thickness

Package of 10

PN1002 has a 1" long cutting area.

This is the most popular blade

because on most vehicles it will

cut the urethane with one cut.

Original Thickness

Package of 10

PN1003 has a 1-1/4" cutting area.

This blade makes an excellent

second-cut blade when the

longer 1-1/2" blade is not needed.

Original Thickness

Package of 10

PN1004 has a cutting area that is 1-1/2"

long. Never use this blade for initial cuts.

Use a shorter blade to make your first

cut, then go back with this blade to make

your final cut. Especially useful where

urethane is very wide, such as corners

and along the bottom.

Original Thickness

Package of 10

PN5001 is a 3/4" UltraThin blade.

UltraThin

Package of 10

PN5002 is a 1" UltraThin blade and is the

most common size used by technicians.

UltraThin

Package of 10

PN5003 is an UltraThin blade with a

cutting area of 1-1/4". Makes an excellent

second-cut blade when the longer 1-1/2"

blade is not needed.

UltraThin

Package of 10

PN5004 is a 1-1/2" UltraThin blade and

should never be used for the first cut.

Always use a shorter blade to make the

first cut then finish cutting through the

urethane with this long blade.

UltraThin

Package of 10